Skip to main content

southwestgases.com

Custom Gas Mixtures for Industrial and Technical Applications

As a custom gas mixture supplier, Southwest Gases works with labs and plants across Texas. Each mix is prepared to the component ratios, concentrations, and balance gas you specify. Every request gets a technical review first. You’ll know the mix can be made, and what cylinder it comes in, before you commit.

What Are Custom Gas Mixtures?

A custom gas mixture is a blend made to your numbers instead of picked from a stock list. Standard cylinder gases come in fixed ratios. With a custom mix, you choose the component gases (the ones you want to measure or use) and the concentration of each. Small amounts are written in ppm (parts per million) and larger ones in percent; 10,000 ppm equals 1%. The balance gas fills the rest of the cylinder, usually nitrogen, air, argon, or helium.

Applications of Custom Gas Mixtures

Custom mixes are most common in four kinds of work.

Instrument Calibration

Gas chromatographs and mass spectrometers are calibrated against mixtures of known composition. A custom mix matches the exact compounds and levels your method measures, so the calibration covers the range you actually test.

Laboratory and Analytical Testing

R&D and QA/QC labs use custom mixtures as check standards and test atmospheres. Ordering the same spec each time keeps results comparable from one test run to the next.

Environmental and Stack Monitoring

Continuous emissions monitoring systems (CEMS) are checked daily against span gases. Federal CEMS rules usually require EPA Protocol gases from a producer in EPA’s verification program, so mention CEMS use in your request.

Industrial Process Control

Chemical plants and manufacturers use custom mixes to calibrate online analyzers. Some processes also run on a fixed gas ratio, like the resonator gas in a CO2 laser cutter.

When Do You Need a Custom Gas Mixture?

Custom gas blending usually starts when a standard cylinder falls short in one of these ways. Each one comes with what to put in your request.

Types of Custom Gas Mixtures

Explore Custom Gas Mixtures

Pick the type closest to what you need. Your request reaches our team with the category already filled in.

Laboratory and Analytical Testing

R&D and QA/QC labs use custom mixtures as check standards and test atmospheres. Ordering the same spec each time keeps results comparable from one test run to the next.

Multi-Component Gas Mixtures

Starts at a 3-component gas mixture and goes up from there. Every component is checked for compatibility before blending.

Calibration Gas Mixtures

Custom calibration gas mixtures with a certificate listing each measured concentration. Tell us the grade your method calls for.

Application-Specific Blends

Fixed-ratio blends built for a particular machine or process, such as laser resonator gas or a helium tracer blend for leak testing.

Request a Custom Gas Mixture Quote

Send us your component list, target concentrations, and balance gas. Replacing a mix you already use? The certificate from your current cylinder works just as well. We'll review it, point out anything that won't work in a cylinder, and send back a quote with a ship date.

Call 214-432-6583 or email sales@southwestgases.com.

Gas Mixture Specifications and Ordering Requirements

For an accurate quote, specify gas components, target concentrations, balance gas, purity, blend tolerance, required accuracy, cylinder size, valve connection, fill pressure, quantity, and documentation. Match the gas grade and certification level to your application, as trace-level mixtures may require different tolerances than higher-concentration blends.

Gas Mixture Standards, Quality and Certification

Specialty gas blending follows the same basic steps across the industry. The cylinder is evacuated first. For reactive or low-ppm mixes, it’s also treated so the component doesn’t stick to the cylinder walls and drift low. Then it’s filled and analyzed. The label lists the components, concentrations, and expiration date.

From Southwest Gases, each custom mix ships with a Certificate of Analysis and an SDS. If you need a specific certification grade or NIST traceability, ask, and we’ll confirm it on the quote.

Custom Gas Mixtures vs. Standard Gas Mixtures

A standard mixture is the better buy when a stock blend fits your process. Go custom when the numbers have to match your method exactly.

Feature Standard Gas Mixtures Custom Gas Mixtures
Composition Fixed, catalog ratios Your own components and ratios
Lead Time Usually in stock or quick to fill Longer, since each mix is blended and analyzed
Precision General-purpose tolerance The tolerance and certification grade you choose
Cost Lower per cylinder Higher, set by component count and grade
Best Used For Welding shielding gas, routine cutting and purging Instrument calibration, R&D, and method-specific testing

Custom Gas Mixture Supply in Texas

We deliver custom gas mixtures in Texas to Dallas, Fort Worth, Houston, Austin and San Antonio. Since each cylinder is made to order, delivery is scheduled once the mix clears analysis. It can come on your regular route or as a separate drop. If you’re outside these metros, call, and we’ll check your location.

Frequently Asked Questions

It’s a cylinder of two or more gases blended to the components, concentrations and balance gas you specify. Standard mixtures come in fixed ratios, while a custom mixture is made to your numbers.

Choose custom when no stock blend matches the concentration, tolerance or balance gas your method requires. If a standard blend sits within your process limits, it’s usually cheaper and faster.

We need each component and its concentration, the balance gas, the tolerance or certification grade, and the cylinder size and quantity. A spec sheet or method reference usually covers most of it.

Yes. Specified concentration gas mixtures can be prepared at ppm levels, and some components down to ppb. Expect a wider tolerance at very low levels, and check that the component stays stable at that concentration.

A two-component mixture has one active gas in a balance gas. A multi-component mixture has three or more gases. That means more compatibility checks and analysis, so it usually costs more and takes longer.

The balance gas fills the cylinder after the components go in, usually nitrogen, air, argon or helium. Some sensors depend on it: a catalytic bead methane sensor needs oxygen to work, so its calibration gas is balanced in air instead of nitrogen.

Yes. Custom mixtures from Southwest Gases ship with a CoA listing the measured concentration of each component, along with an SDS.

Use the request form here and attach your spec sheet if you have one, or reach us at 214-432-6583 and sales@southwestgases.com. We’ll review the mix and come back with a quote.

Contact Us

Contact Form Specialty Gases