Skip to main content

southwestgases.com

Specialty Gases for Analytical Laboratories and Scientific Testing

A GC that ran clean yesterday can show a noisy baseline today if the new carrier gas cylinder holds a bit more moisture. That’s why specialty gases for laboratories are bought by grade and impurity limits, matched to the instrument. Southwest Gases supplies high-purity nitrogen, argon, and helium to Texas labs, along with calibration gases and custom mixtures.

Specialty Gases for Accurate Laboratory Testing

Every analytical instrument has a gas spec in its manual, and your method may tighten it. An FID measures hydrocarbons, so its gases need almost none. An ECD responds to oxygen, so its gas has to be nearly oxygen-free. Quantified results also need a calibration or reference mixture. Keep the same grade between cylinders so results stay comparable.

Specialty Gas Applications in Laboratories

Analytical laboratory gases do different jobs depending on the work.

Analytical Testing and Chemical Analysis

Chemistry labs use nitrogen to blanket samples, purge glove boxes and evaporate solvents. Argon takes over where nitrogen would react, such as with lithium metal.

Gas Chromatography and Instrumentation

Gas chromatography carrier gas is usually helium or nitrogen, with hydrogen as a third option. Gases for analytical instruments also include detector fuel, makeup gas and argon for ICP plasma.

Scientific Research and Development

University and R&D labs often need small amounts of several gases, plus one-off mixtures. When choosing a scientific gas supplier, ask about smaller cylinders so stock doesn’t sit unused.

Environmental Testing

Air-quality and emissions labs check analyzers against calibration gases for laboratories, with known levels of gases like CO, NO or SO2. A zero gas sets the baseline.

Keep the Gas Clean After Delivery

A high-purity cylinder only stays high purity if the line from it is clean.

Laboratory Gas Types and Supply Options

Lab gas grades are often written as a number. A 5.0 grade is 99.999% pure, so all impurities together come to no more than 10 ppm. Instrument-grade gases go a step further and cap the specific impurities that bother a given detector.

Gas TypeTypical UseWhat to Check
High-purity gases (about 4.0 to 4.8)General lab work, purging, blanketingTotal purity and moisture
Ultra-high-purity gases (5.0 and up)Carrier gas, trace analysisOxygen and moisture limits
Instrument grade gasesSpecific detectors, such as FID or ECDLimits on hydrocarbons, oxygen or halocarbons
Calibration gases and reference mixturesQuantifying results, checking analyzersCertified concentration and expiration date
Custom gas mixturesOne method or experimentComponents, levels and tolerance

Laboratory Gas Supply from Southwest Gases

We supply high purity gases for laboratories in cylinders, including nitrogen, argon and helium, plus CO2, calibration gases and custom mixtures. Delivery runs on a schedule or on request across Dallas, Fort Worth, Houston, Austin and San Antonio. Orders come with an SDS, and certificates of analysis are available for graded gases and mixtures. Need hydrogen, zero air or AA fuel gas?

How to Select the Right Laboratory Gas

Start with your instrument manual and method. Then send us the details below, and we’ll match the gas and the cylinder.

InstrumentMain GasOther Gases It Uses
GC with FIDHelium, nitrogen or hydrogen carrierHydrogen and air for the flame, plus makeup gas
GC with TCDHelium carrier in most methodsArgon carrier when measuring hydrogen
GC with ECDHelium or nitrogen carrierNitrogen or an argon-methane blend as makeup gas
GC-MSHelium carrier, sometimes hydrogenCalibration standards for tuning and quantitation
ICP-OES and ICP-MSArgon for the plasmaHelium in some ICP-MS collision cells
Flame and furnace AAAir or nitrous oxide with acetyleneArgon for graphite furnace work

Why Labs Choose Southwest Gases

Helium is one of our core gases, so GC labs that want to stay on helium have a steady Texas source. Labs inside a plant can order on the same account as the plant’s nitrogen or argon. And as a laboratory gas supplier based in Flower Mound, we answer questions from research groups and QC teams directly, without a national call center.

Request a Quote for Laboratory Specialty Gases

Tell us the gas name, the grade or spec, what it's for, how much you need, and where it's going. Include any documents you need, like a certificate of analysis. Switching from another research gas supplier? Send the grade or part number from your current label, and we'll quote the equivalent.

Frequently Asked Questions

Nitrogen, helium and argon cover most lab work, as carrier, purge and ICP plasma gas. Hydrogen and air feed FID flames, and labs also keep calibration mixtures for their instruments.

Start with the grade your instrument maker and method specify, then check the impurity limits that matter for your detector. A higher grade than the method needs mostly adds cost.

High-purity gases are rated by total purity, such as 99.999%. Instrument grades also cap specific impurities, like hydrocarbons for an FID, so two gases with the same purity can behave differently on your instrument.

Helium, nitrogen and hydrogen are the common carrier gases. Depending on the detector, a GC may also need hydrogen and air for an FID, or a makeup gas for an ECD.

Yes. We supply calibration gases and reference mixtures for lab analyzers. If a method needs specific components or levels, see our Custom Gas Mixtures page.

Send the gas, grade, instrument and method, along with cylinder size and monthly use. For a mixture, add the components, concentrations and tolerance.

We supply laboratory gases including high-purity nitrogen, argon and helium, CO2, calibration gases and custom mixtures. For anything else, ask and we’ll confirm availability before you order.

Yes. We deliver to labs in Dallas, Fort Worth, Houston, Austin and San Antonio. If you’re somewhere else in Texas, ask whether your site is on one of our routes.

Contact Us

Contact Form Specialty Gases